2mm Copper Split Pins Metric Cotter Pins DIN 95

Solid copper DIN 94 Cotter split pins Metric sizes 2mm diameter

3.2mm Copper Split Pins Metric Cotter Pins DIN 95

Solid copper DIN 94 Cotter split pins Metric sizes 3.2mm diameter

4mm Copper Split Pins Metric Cotter Pins DIN 95

Solid copper DIN 94 Cotter split pins Metric sizes 4mm diameter

5mm Copper Split Pins Metric Cotter Pins DIN 95

Solid copper DIN 94 Cotter split pins Metric sizes 5mm diameter

6.3mm Copper Split Pins Metric Cotter Pins DIN 95

Solid copper DIN 94 Cotter split pins Metric sizes 6.3mm diameter

Metric Zinc Plated Steel Mini Hose Pipe Clip Clamps

Material: Bright Zinc Plated Steel Type: Hose Clips (please note these are not the Jubilee brand)

RETAINING RING WIRE CIRCLIP SHAFT BORE SNAP RING 6MM - 50MM SIZES

Snap rings are a type of fastener or retaining ring consisting of a semi-flexible metal ring with open ends which can be snapped into place, into a machined groove on a dowel pin or other part to permit rotation but to prevent lateral movement...

Solid Brass Cotter Split Pins 6.3mm

Solid Brass split pins 6.3mm thick Length measured from under the head to the shortest length single pin

Solid Brass Cotter Split Pins 5mm

Solid Brass split pins 5mm thick Length measured from under the head to the shortest length single pin

Solid Brass Cotter Split Pins 4mm

Solid Brass split pins 4mm thick Length measured from under the head to the shortest length single pin

Solid Brass Cotter Split Pins 3.2mm

Solid Brass split pins 3.2mm thick Length measured from under the head to the shortest length single pin

Solid Brass Cotter Split Pins 2mm

Solid Brass split pins 2mm thick Length measured from under the head to the shortest length single pin

Solid Brass Cotter Split Pins 1.6mm

Solid Brass split pins 1.6mm thick Length measured from under the head to the shortest length single pin

3/32" (2.4mm) Zinc Plated Steel Cotter Split Pins

Material: Zinc Plated Steel Type: Cotter Pins (also known as split pins) Please Note: Sizes are aproximate ABCD 3/32" 1 1/2" 2.4mm 38mm 3/32" 1" 2.4mm 25mm Please Note: Specifications given are intended as a guide only. If...

IMPERIAL STEEL E CLIP WASHER RETAINING RINGS CIRCLIP CLIPS

PLAIN STEEL SELF COLOUR / ZINC PLATED SOLD BY SIZE SHAFT CLIP WILL FIT ON External circlip use for retention of bearings, gears, pulleys etc. Tapered section construction provides flexibility to facilitate installation,ring installs radially by...

A2 STAINLESS STEEL METRIC E CLIP WASHER RETAINING RINGS CIRCLIP CLIPS

Grade A2 Stainless steel (For increased corrosion resistance) Type - DIN6799 E CLIP External circlip use for retention of bearings, gears, pulleys etc. Tapered section construction provides flexibility to facilitate installation,ring installs...

Metric Zinc Plated Steel Butterfly Hose Clips

Butterfly hose clips High Quality clips Sizes given are for the size pipe it will fit from lowest measurement up to highest Zinc Plated steel with plastic butterfly handle

Zinc Metric Capped Flat Clip Starlock Washers

Metric Zinc Plated Spring Steel SL Clips for Bolts & Shafts

Clips are sold by nominal size "A" ABCDE 4mm 7mm 8.5mm 2.2mm 0.3mm 5mm 9mm 10.8mm 2.7mm 0.35mm 6mm 11mm 14mm 3.2mm 0.4mm 8mm 14mm 17.5mm 3.7mm 0.45mm 10mm 18mm 22mm 4.7mm 0.5mm 12mm 22mm 26mm 5...

Plastic Push In Car Trim Clip Fixing Rivets

Dimensions are given as: Overall length x Max head diameter x 'Fits hole size' Some clips may fit other vehicles, please check dimensions below: TCP1 - Panel Clips Ford/BMW 21 x 18 x ?8mm TCP2 - Push Rivets Toyota/Nissan/Subaru 27 x 17.5 x ?9...

METRIC STEEL E CLIP WASHER RETAINING RINGS CIRCLIP CLIPS

PLAIN STEEL SELF COLOUR Type - DIN6799 E CLIP SOLD BY SIZE SHAFT CLIP WILL FIT ON External circlip use for retention of bearings, gears, pulleys etc. Tapered section construction provides flexibility to facilitate installation,ring installs...

Metric Sized Zinc Plated Steel Flat Rectangular Push On Clips

Push on rectangular clips Size given is the size of the shaft that the clip will fit onto. For Metric (mm) shaft sizes. Zinc plated steel.

5/16" A2 Grade Stainless Steel Split Cotter Pins

DIN 94 Standard. A2 Grade Stainless Steel for superior corrosion resistance compared to standard steel or plated pins ABCD 5/16" 1 1/2" 8mm 38mm 5/16" 1 1/4" 8mm 32mm 5/16" 1 3/4" 8mm 45mm 5/16" 2...

3/8" A2 Grade Stainless Steel Split Cotter Pins

DIN 94 Standard. A2 Grade Stainless Steel for superior corrosion to resistance compared standard steel or plated pins ABCD 3/8" 2 1/2" 10mm 63mm 3/8" 2 1/4" 10mm 55mm 3/8" 2...