Product Description
Thread size - M10Bright zinc plated steel
CE Approved eta-19/0786
Assembled through fixing with nut and washer
M10 X 65mm Long
Min.StructureThickness - 100mm
Drill hole 10mm,
Min hole depth - -
Fixture Clearance Hole -12mm
Effective Embedmen tDepth -
Max Fixture Thickness -
Thread length - 22mm
Tightening Torque - 35nm
M10 X 75mm Long
Min.StructureThickness - 100mm
Drill hole 10mm,
Min hole depth - -
Fixture Clearance Hole -12mm
Effective Embedmen tDepth -
Max Fixture Thickness -
Thread length - 27mm
Tightening Torque - 35nm
M10 X 90mm Long
Min.StructureThickness - 100mm
Drill hole 10mm,
Min hole depth - -75mm
Fixture Clearance Hole -12mm
Effective Embedmen tDepth 55mm
Max Fixture Thickness 8mm
Thread length - 43mm
Tightening Torque - 35nm
M10 X 100mm Long
Min.StructureThickness - 100mm
Drill hole 10mm,
Min hole depth - -75mm
Fixture Clearance Hole -12mm
Effective Embedmen tDepth 55mm
Max Fixture Thickness 18mm
Thread length - 53mm
Tightening Torque - 35nm
M10 X 120mm Long
Min.StructureThickness - 100mm
Drill hole 10mm,
Min hole depth - -75mm
Fixture Clearance Hole -12mm
Effective Embedmen tDepth 55mm
Max Fixture Thickness 38mm
Thread length - 71mm
Tightening Torque - 35nm
M10 X 130mm Long
Min.StructureThickness - 100mm
Drill hole 10mm,
Min hole depth - -75mm
Fixture Clearance Hole -12mm
Effective Embedmen tDepth 55mm
Max Fixture Thickness
Thread length - m
Tightening Torque - 35nm
1. Position item being fixed and drill correct diameter hole to the minimum
recommended depth through the fixture into the substrate.
2. Clean hole by brushing and blowing to remove excess debris and dust.
3. Insert Through Bolt through the fixture and into the hole.
4. Tap into position.
5. Tighten to recommended tightening torque.
Ideal for use on:
Brackets for pipework
Industrial boilers
Roof beams to concrete frames
High rise racking
Racking protection barriers
Guide rails
Water tanks
Shutter footplates
Supports
Escape ladders
Steel erection beams
Fire escapes