Product Description
The hex nut sleeve anchor is a thin walled sleeve anchor suitable for use in most types of non-cracked concrete or masonry- High Quality industrial grade fixing
- Torque Controlled Expansion
- Yellow Zinc Plated
- Supplied Pre-Assembled For Rapid Installation
- Ideal for - Non-Cracked Concrete, Brickwork, Dense Concrete Bricks ,Stone, Perforated Bricks.
Applications - Plates,Racking,Signs,Hand Rails,Stadium Seating ect.
How to use -
1.Position fixture and drill correct diameter hole to correct depth.
2.Clean hole by brushing and blowing to remove all dust and drilling debris.
3.Insert assembled anchor through fixture into concrete.
4.3Tighten with torque wrench to recommended torque.
M6 X 40mm- Drill size 8mm - Max Fixture Thickness 5mm - Torque 10nm
M6 x 80mm - Drill size 8mm - Max Fixture Thickness 45mm - Torque 10nm
M6 X 65mm - Drill size 8mm - Max Fixture Thickness 30mm - Torque 10nm
M8 X 45mm - Drill size 10mm - Max Fixture Thickness 5mm - Torque 20nm
M8 X 70mm - Drill size 10mm - Max Fixture Thickness 30mm - Torque 20nm
M8 X 95mm - Drill size 10mm - Max Fixture Thickness 55mm - Torque 20nm
M8 X 120mm - Drill size 10mm - Max Fixture Thickness 80mm - Torque 20nm
M10 X 60mm - Drill size 12mm - Max Fixture Thickness 15mm - Torque 35nm
M10 X 70mm - Drill size 12mm - Max Fixture Thickness 20mm - Torque 35nm
M10 X 95mm - Drill size 12mm - Max Fixture Thickness 50mm - Torque 35nm
M10 X 120mm - Drill size 12mm - Max Fixture Thickness 65mm - Torque 35nm
M12 X 65mm - Drill size 16mm - Max Fixture Thickness 10mm - Torque 45nm
M12 X 105mm - Drill size 12mm - Max Fixture Thickness 50mm - Torque 45nm
M12 X 150mm - Drill size 12mm - Max Fixture Thickness 90mm - Torque 45nm
M16 X 75mm - Drill size 20mm - Max Fixture Thickness 15mm - Torque 70nm
M16 X 100mm - Drill size 20mm - Max Fixture Thickness 45mm - Torque 70nm
M16 X 140mm - Drill size 20mm - Max Fixture Thickness 85mm - Torque 70nm
